Tolerance for Cold-rolled FeCrCo Strip

Tolerance for Cold-rolled FeCrCo Strip Unit: mm
Thickness                                                   (max. width: 6mm) Width                                                    (max.width: 125mm)
Thickness range Tolerance               ±  Marginal condition  Thickness range Tolerance               
0
0.10 0.15 0.01 Shear  0.1 0.40 0.3
0.15 40.40 0.02 Shear  0.4 1.50 0.4
0.40 1.00 0.03 Shear  1.5 2.50 0.6
1.00 1.50 0.04 Shear 2.5 6.00 0.8
1.50 2.50 0.05 common condition(eg: Cold-rolled) 0.3 6.00 3.0
2.50 4.00 0.60
4.00 6.00 0.80
Remark: (1) the maximum thickness is 6mm
(2) thickness measurement should be prosecute at arbitrary point from 20mm from the strip edg at least, the width of less than or equal to 40 MM material, the thickness measured at its center. 

Tolerance for FeCrCo wire magnet and bar magnet

 Tolerance for FeCrCo wire magnet and bar magnet    unit: mm
Size range  Diameter tolerance             ±
  0.25 0.01
0.25 0.40 0.015
0.40 0.63 0.02
0.63 1.00 0.03
1.00 1.60 0.04
1.60 2.50 0.06
2.50 4.00 0.08
4.00 6.30 0.10
6.30 10.00 0.15
10.00 16.00 0.20
16.00 20.00 0.25